A 4 oz/sy woven polypropylene fabric for frost protection in both warmer and cooler climates
A woven leno weave shade fabric with a shade factor of approximately 75%.
A 2.2 oz/sy leno weave windbreak fabric with approximately 50% open area. The open mesh design reduces wind speed without creating turbulence. Ideal for protecting fruit trees, plants and crops from damaging winds. This fabric is also used for shade fabric with approximately 53% shade factor.
A reflective woven white ground cover designed for long service life in orchards and greenhouses. High light reflectivity, typically 75%, stimulates plant growth and fruit yield while absorbing harmful UV light. This durable woven ground cover is air and water permeable and helps retard weed growth.
3.0 oz/sy black woven polypropylene with UV stability @ 4000 hours = 70%
3.1 oz natural/white woven polypropylene. UV stability @ 2500 hours = 70%.
Premium frost and wind protection fabric.
3.1 oz clear woven polypropylene fabric provides protection from freezing temperatures, heavy rains while allowing sunlight penetration for optimal growing conditions. This product is special-order and may require a minimum quantity. Please call for details.
6.5 oz/sy, 315×315 lb, black woven polypropylene geotextile
Belton’s landfill cover fabrics are made from 100% polypropylene slit tape yarns and are high UV-stabilized to withstand the most extreme solar conditions. The fabrics are rigid enough for repeated daily usage but flexible enough for custom fabrication. These fabrics are available in durable 6, 8 and 10 ounce per s.y. constructions and are utilized in all C and D Class landfills. These high tensile strength fabrics repel water and are FR rated. Belton’s landfill fabrics are available in wide widths to accommodate large fabricated panels. Beltech 3884 is an 8.8 oz per s.y. fabric and is available in 150 inch width.
Belton’s landfill cover fabrics are made from 100% polypropylene slit tape yarns and are high UV-stabilized to withstand the most extreme solar conditions. The fabrics are rigid enough for repeated daily usage but flexible enough for custom fabrication. These fabrics are available in durable 6, 8 and 10 ounce per s.y. constructions and are utilized in all C and D Class landfills. These high tensile strength fabrics repel water and are FR rated. Belton’s landfill fabrics are available in wide widths to accommodate large fabricated panels. A woven, natural colored fabric weighing 7.5 oz per square yard.
Woven fabric with heat treated yarns. Used as part of a composite protection material in oil and gas pipeline industry
Belton’s landfill cover fabrics are made from 100% polypropylene slit tape yarns and are high UV-stabilized to withstand the most extreme solar conditions. The fabrics are rigid enough for repeated daily usage but flexible enough for custom fabrication. These fabrics are available in durable 6, 8 and 10 ounce per s.y. constructions and are utilized in all C and D Class landfills. These high tensile strength fabrics repel water and are FR rated. Belton’s landfill fabrics are available in wide widths to accommodate large fabricated panels. Beltech 884 is a 9.5 oz. UV-stabilized woven polypropylene – ASTM E-84 Class “A” rated for flammability.
A high UV (3000 hr. UV rated) woven polypropylene geotextile fabric
4×6 high-strength fabric used in sludge dewatering tubes
This woven polypropylene fabric is engineered
for use in sandblast containment systems. Lead paint and other
impurities are contained, providing environmental protection. Fire
retardant (FR) chemical additives and UV stabilizers are incorporated in
the yarn stage to provide added fabric protection and longevity.
High strength fabric with reinforced selvages for better seam strength. Used in sludge dewatering tubes. Can be made in widths up to 210 inches.
An orange, high visibility, woven demarkation fabric. Used in landfills and other construction sites as a barrier fabric. This fabric is typically printed with a warning such as "Danger - Do Not Dig" in English or Spanish.
A 4 x 4 high strength woven geotextile for stabilization and reinforcement
Belton Industries’ signature 100% biodegradable erosion control jute product. Intended for embankment stabilization, this fabric is easy to plant through and holds up to four times its weight in water. (Independent test data is available on request.)
GEOJUTE® is often utilized during major airport runway extensions since it promotes vegetation growth on grassy areas adjacent to runways.
Heavy-duty, long-lasting 100% biodegradable jute blanket and silt fence.
A lightweight, cost-effective jute alternative to straw and wood fiber erosion control blankets.
100% biodegradable woven jute geotextile/wide-width erosion control blanket and soil separation and stabilization fabric.
100% biodegradable, long-lasting, lightweight spun coir fabric.
Applications have been built around the installation of natural gas pipelines. When pipes are buried along or beneath waterways, the fabric is used to aid re-vegetation along stream beds and on river embankments.
100% biodegradable, long-lasting, durable, heavyweight spun coir fabric.
4 x 2.5 high-strength, tan/white woven polypropylene geo textile for high strength stabilization
Belton’s landfill cover fabrics are made from 100% polypropylene slit tape yarns and are high UV-stabilized to withstand the most extreme solar conditions. The fabrics are rigid enough for repeated daily usage but flexible enough for custom fabrication. These fabrics are available in durable 6, 8 and 10 ounce per s.y. constructions and are utilized in all C and D Class landfills. These high tensile strength fabrics repel water and are FR rated. Belton’s landfill fabrics are available in wide widths to accommodate large fabricated panels. Beltech 884 is a 9.5 oz. UV-stabilized woven polypropylene – ASTM E-84 Class “A” rated for flammability.
6.5 oz/sy AASHTO Class I, 315×315 lb, black woven polypropylene geotextile
NTPEP tested – DOT approved
5.3 oz/sy AASHTO Class II, 250×250 lb geotextile
NTPEP tested – DOT approved
2 x 2 high-strength, tan/black woven polypropylene geotextile for high strength stabilization
4.5 oz/sy AASHTO Class III, 200×200 lb, woven polypropylene geotextile
NTPEP tested – DOT approved
4×4 high-strength geotextile – woven white/black polypropylene
NTPEP tested – DOT approved
4×6 high-strength fabric used in sludge dewatering tubes
3.0 oz/sy AASHTO M-288 woven polypropylene silt fence (black), with green marker yarns.
NTPEP tested – DOT approved
3.0 oz/sy AASHTO M-288 woven polypropylene silt fence (orange)
NTPEP tested – DOT approved
High UV, black/natural woven polypropylene, silt fence with green marker yarn (gray)
High strength fabric with reinforced selvages for better seam strength. Used in sludge dewatering tubes. Can be made in widths up to 210 inches.
A 3.5 inch narrow woven fabric used in seat webbing of upholstered furniture.
Furniture Construction Fabrics
A specialized woven textile with heat set, acrylic latex finish used in the bedding support system of sofa sleeper mechanism
Furniture Construction Fabrics
Woven polypropylene webbing for seat bases in upholstered furniture
Beltech 1885 is a specialty woven fabric made from high density polyethylene flat yarns and is used in the processing of rubber components.
A tightly woven 9 oz/sy fabric with grab tensile of over 500 lbs. in both directions.
Beltech 1104 is used as a leader fabric for press fabrics in the paper industry.
Industrial composite hoses for heavy-duty commercial usage require special polypropylene fabrics for reinforcement. Belton improves and expands hose capabilities by layering these lightweight yet strong fabrics into the hose construction. Whether hoses pump high volumes of liquids or transfer vast quantities of grain or other solid commodities, these inner layers provide needed sturdiness and longevity.
Belton filtration scrims ensure cleanliness and consistency in various applications. Our polypropylene fabrics are used as the substrate in needle-punched nonwoven composites used in liquid filtration.
Exposure to the elements can wreak havoc on industrial products and materials. In response, Belton manufactures fabrics of various constructions and weights that employ a special technology to ward off the effects of corrosion. Our polypropylene fabrics are infused with integral VCI (volatile corrosion inhibitor) additives and then used alone or as part of a composite fabric to prevent degradation from rust or other electro-chemical processes.
A woven polypropylene fabric with enhanced flame retardant properties. Used in temporary shelters.
Woven polypropylene fabric with flame retardant enhancements. Used in temporary shelters.
Exposure to the elements can wreak havoc on industrial products and materials. In response, Belton manufactures fabrics of various constructions and weights that employ a special technology to ward off the effects of corrosion. Our polypropylene fabrics are infused with integral VCI (volatile corrosion inhibitor) additives and then used alone or as part of a composite fabric to prevent degradation from rust or other electro-chemical processes.
Low Cost Container (LCC) for cargo air drops
Woven polypropylene webbing with 4700 lb minimum break strength
Meets mil-w-44049A and A-A-59467 specifications
White/natural color
Fabric width is 2 inches
The LCLA chute is designed to be lightweight and quick-opening for low-altitude cargo supply.
This chute handles heavier loads dropped at various altitudes with a descent goal of 28.5 feet/sec. Fabrics are specifically designed to survive opening shocks and to aid ease of fabrication.
The rapid-descent cargo chute retains accuracy when an aircraft must fly high over a target due to terrain, weather, and/or group threats. The descent rate is no more than 90 feet/sec.
6.5 oz/sy, 315×315 lb, black woven polypropylene geotextile
A tightly woven 9 oz/sy fabric with grab tensile of over 500 lbs. in both directions.
6.5 oz/sy AASHTO Class I, 315×315 lb, black woven polypropylene geotextile
NTPEP tested – DOT approved
Belton Industries produces a wide range of polypropylene and high-density polyethylene yarns from 360 denier to 10,000 denier. The yarns can be made in a flat (ribbon), fibrillated or serrated type depending on your need. We can color match with a sample or PMS number.
A 3.5 inch narrow woven fabric used in seat webbing of upholstered furniture.
Plain weave egg conveyor belting in white color with red center line
Herringbone weave, egg conveyor belting for poultry houses
Woven polypropylene webbing for seat bases in upholstered furniture
Low Cost Container (LCC) for cargo air drops
Woven polypropylene webbing with 4700 lb minimum break strength
Meets mil-w-44049A and A-A-59467 specifications
White/natural color
Fabric width is 2 inches
We also provide flexible custom solutions for both small and large applications.
Joe Church
800.845.8753
jchurch@beltonindustries.com
Glenn Nichols
800.845.8753
gnichols@beltonindustries.com
